Viewing The Mac Translation Table - HP 501 Configuration And Administration Manual

Field
ACK failure count
FCS error count
Transmitted frame
count
WEP undecryptable
count
Cloned MAC address

Viewing the MAC translation table

You can select Status > MAC translation to view the MAC address/IP address associations
for clients on the Ethernet network. The following fields display:
Field
MAC address
IP address
Tx/Rx packets
Click Clear MAC table to delete all entries from the list.
34 Wireless configuration
Description
Count of ACK frames not received when expected.
Count of FCS errors detected in a received MPDU frame.
Count of each successfully transmitted MSDU.
Count of encrypted frames received and the key configuration
of the transmitter indicates that the frame should not have been
encrypted or that frame was discarded due to the receiving
station not implementing the privacy option.
If MAC address cloning is enabled for a device on the Ethernet
port, the MAC address displays here.
Description
The MAC address of the client on the wired network.
The IP address of the client on the wired network.
Total packets transmitted from the HP 501 to the client or
received by the HP 501 from the client.