Panasonic CF-W8 Series Reference Manual page 76

USB Devices
When Using an External Mouse
Before installing an external mouse driver, first uninstall the Touch Pad driver. In this case, you will be unable to use the Touch
Pad scroll function.
CAUTION
Before uninstalling the driver, save important data and close each application.
1
Click or
2
Click [start] - [Control Panel] - [Add or Remove Programs] - [Touch Pad Utility], and then
click [Remove] to remove the program.
Following the on-screen instructions.
If the message [Locked File Detected] is displayed, click [Reboot].
3
Click [start] - [Control Panel] - [Add or Remove Programs] - [Synaptics Pointing Device
Driver], and then click [Remove] to uninstall the driver.
4
After following the on-screen instructions to uninstall the driver, click [start] - [Turn Off
Computer] - [Turn Off].
5
Turn on the computer and start Windows.
6
Install the mouse driver according to the instructions manual of the mouse driver.
NOTE
If you do not use an external mouse and use the Touch Pad Scroll function again, follow the procedure for "When
using the Touch Pad Utility". (below)
When using the Touch Pad Utility
1
Click [start] - [Control Panel] - [Add or Remove Programs] to remove the external mouse
driver.
For further information, refer to the instructions manual of the mouse driver.
2
After the driver is removed, turn off the computer.
If an external mouse is connected, disconnect it after turning off the computer.
on the notification area, and then click [Exit].
76