Panasonic CF-W8 Series Reference Manual page 75

USB Devices
75
CAUTION
Do not remove a USB device while your computer is in the standby or hibernation.
Save important data and close all applications.
NOTE
You may need to install the driver for the USB device. Follow the on-screen instructions or refer to the instruction man-
ual of the USB device.
You may need to install the driver again when connecting the device to another port.
When a USB device is connected, standby and hibernation may not function normally. If the computer does not start
up normally, remove the USB device and restart the computer.
Some devices will not operate when connected to a USB HUB. These devices must be connected directly to the USB
port on your computer.
When the USB device is removed and then inserted while the computer is on, may appear in the Device Manager
and the device may not be correctly recognized. In this case, remove and connect the device again, or restart the com-
puter.
When a USB device is connected, power consumption increases. Remove the USB device when it is not in use, espe-
cially when operating by battery power.