Panasonic aw-e350p Operating Instruction page 20

w Mounting the camera onto a pan-tilt head, tripod, camera mounting bracket, or other part
Use the camera mounting screw holes (Inch screw:
1/4-20UNC) to mount onto a pan-tilt head, tripod,
camera mounting bracket, or other part.
[AW-E750/AW-E655]
Attach the drop-prevention wire using the mounting
screw (Inch screw: 1/4-20UNC) into the camera
mounting screw holes on the camera's top surface
when mounting the camera with its bottom surface,
or on the camera's bottom surface when mounting
the camera with its top surface.
[AW-E650/AW-E350]
Attach the drop-prevention wire using the mounting
screw (M4) into the mounting screw hole for camera
mounting adapter on the camera's top surface when
mounting the camera with its bottom surface, or on
the camera's bottom surface when mounting the
camera with its top surface.
When the unit is to be mounted onto a Panasonic
pan-tilt head, use the mounting screws and drop-
prevention wire that are supplied with the pan-tilt
head.
When the unit is to be mounted onto a tripod,
camera mounting bracket, or other part, refer
to pages 10 to 12, and provide your own drop-
prevention wire, mounting screws, and washers.
Notes
Preventing the camera from falling or coming off
p When attaching a camera to the pan/tilt head
(AW-PH360/AW-PH400/AW-PH405/AW-PH650),
follow the directions in the Operating Instructions to
fix the camera firmly in position.
In addition, link the camera to the pan/tilt head
using the drop-prevention wire and the mounting
screws to help ensure the camera does not fall.
p When attaching the camera on any mounting or
other pan/tilt head (AW-PH360/AW-PH400/
AW-PH405/AW-PH650), check that the mounting
can safely bear the total mass of the camera,
lens, connection cables, etc., fix the camera firmly
in position using the prescribed tool, and take
appropriate measures to prevent the camera from
falling.
- 20 -
Camera mounting screw holes
(Inch screws: 1/4-20UNC)
Depth: 10 mm (3/8˝)
Camera mounting adapter