Panasonic aw-e350p Operating Instruction page 16

 Iris connector (IRIS)
Input terminal for lens with an iris control function.
Pin No.
1 Return Control
2 Not Used
3
4 Auto/Manual Control
5 Iris Control
6 Lens Power
 Zoom/Focus connector (ZOOM/FOCUS)
(AW-E655 only)
This connector is for the remote cable of the lens
and is a standard input connector for lenses with
remote functions for zooming and focusing.
When the camera is to be mounted on a Panasonic
pan/tilt head (such as the AW-PH360/AW-PH400/
AW-PH405/AW-PH650), do not use this connector —
connect the remote cable of the lens to the LENS I/F
connector on the pan/tilt head instead.
Pin No.
Focus Mode
1 Position/Speed/
Auto Focus
Zoom Mode
2
Position/Speed
3
4
Remote/Camera
5 Iris Control
6 Lens Power
Signal Pin No. Signal
7 Iris Follow
8 Auto/Remote Control
GND 9 Not Used
10 Not Used
11 Not Used
12 Not Used
Signal Pin No. Signal
Signal Control
7
(+5.0 V)
8 Focus Control
GND 9 Zoom Control
Iris Iris Mode
10
Position/Speed
11 +V (+7.5 V)
12 –V (+2.5 V)
 I/F Remote connector (I/F REMOTE)
Input terminal dedicated to control signals from the
optional Remote Operation Panel (ROP) (such as
the AW-CB400) and the RCU (such as the
AW-RC600) and the camera pan/tilt unit (such as the
AW-PH360/AW-PH400/AW-PH405/AW-PH650).
• AW-CB400 is connected through the optional
connecting cable (AW-CA50T8).
• AW-RC600 is connected through the optional RCU
cable (AW-CA50A26).
• Use the cable supplied with the pan/tilt head to
connect the AW-PH360, AW-PH400, AW-PH405 or
AW-PH650.
 Power indicator
Red LED lamp lights to indicate that the specified
DC power is supplied to the camera.
- 16 -