Playing Content From A Usb Storage Device - Integra DTR-50.6 Advanced Manual

Oldies (Oldies music)
Folk M (Folk music)
Document (Documentary)
3.
Press Enter to search the radio stations of the selected
type.
4.
When such a radio station is found, the indication on the
display flashes. Then, press Enter again.
If no stations are found, the message "Not Found" is
displayed.
Listening to Traffic Information (TP)
1.
Press RT/PTY/TP on the main unit three times.
"[TP]" will be displayed if traffic information is
transmitted by the radio station you are tuned in.
"TP" only is displayed if no traffic information is
available.
2. Press Enter to search a radio station distributing traffic
information.
3.
When such a radio station is found, searching stops and
playing traffic information starts.
"Not Found" is displayed if no radio station
distributing traffic information is found.
4
AM/FM Radio Receiving Function / Playing Content from a USB Storage Device
Playing Content from a USB
Storage Device
Operation: You can set up by viewing the guidance
displayed on the TV screen. To display the guidance, you
need to make HDMI connection between the unit and
TV. Select the item with the cursor buttons of the remote
controller and press Enter to confirm your selection. To
return to the previous screen, press Return.
Playing Back
1.
Press USB on the remote controller to select "USB".
2. Plug your USB storage device with the music files into
the USB port of the unit so that "USB" lights on the
display.
If the "USB" indicator flashes, check whether the
USB storage device is plugged in properly.
Do not unplug the USB storage device while
"Connecting..." is appeared on the display. This may
cause data corruption or malfunction.
3. Press Enter.
The list of folders and music files on the USB storage
device is displayed. Select the folder with the cursors
and press Enter to confirm your selection.
4. With the cursors, select the music file to play, and then
press Enter or to start playback.