Dlna Music Streaming; About Dlna; Configuring The Windows Media; Player - Integra DTR-50.6 Advanced Manual

DLNA Music Streaming

About DLNA

Digital Living Network Alliance (DLNA) can be referred
to as a technology standard or the industry group to
develop the technology standard to interconnect and use
AV components, computers and other devices in a home
network. This unit allows you to use DLNA to play music
files stored on a computer or a hard disk connected to your
home network (NAS device). Make sure this unit and a
computer or NAS device are connected to the same router.
Internet radio
Router PC
NAS
To stream a music file, you need a NAS device with
DLNA server functions or a PC where a player (e.g.,
®
Windows Media Player 11 or Windows Media
12) with DLNA server functions is installed. To enable
®
streaming with Windows Media Player 11 or Windows
®
Media Player 12, you must first configure the settings.

Configuring the Windows Media

Windows Media ®
1.
Turn on your PC and start Windows Media
2.
In the "Library" menu, select "Media Sharing" to display
a dialog box.
3.
Select the "Share my media" check box, and then click
"OK" to display the compatible devices.
4.
Select this unit, and then click "Allow".
When it is clicked, the corresponding icon is
checked.
5.
Click "OK" to close the dialog.
®
Windows Media
1.
Turn on your PC and start Windows Media
2.
In the "Stream" menu, select "Turn on media streaming"
to display a dialog box.
If media streaming is already turned on, select "More
streaming options..." in the "Stream" menu to list
players in the network, and then go to step 4.
3.
Click "Turn on media streaming" to list players in the
network.
4. Select this unit in "Media streaming options" and check
that it is set to "Allow".
5. Click "OK" to close the dialog.
®

Player

® Player
Player 11
®
Player 11.
Player 12
®
Player 12.
DLNA Music Streaming

DLNA Playback

Operation: You can set up by viewing the guidance
displayed on the TV screen. To display the guidance, you
need to make HDMI connection between the unit and
TV. Select the item with the cursor buttons of the remote
controller and press Enter to confirm your selection. To
return to the previous screen, press Return.
Playing Back
1. Start the server (Windows Media ® Player 11, Windows
Media ® Player 12, or NAS device) containing the music
files to play.
2.
Press NET on the remote controller to display NET TOP
screen.
The "NET" indicator on the display stays lit. If the
"NET" indicator flashes, the unit is not properly
connected to the network. Check the connection of
the Ethernet cable.
11