Integra DTR-50.6 Advanced Manual page 35

Setting Item Default Value
Saturation 0
Color Temperature Normal
Gamma 0
Red Brightness 0
Red Contrast 0
Green Brightness 0
Green Contrast 0
Blue Brightness 0
Blue Contrast 0
In the following cases, the settings for "Picture Adjust" cannot be changed:
– "NET" or "USB" is selected.
–
Press CLR on the remote controller if you return all the settings from "Game Mode" through "Blue
Contrast" to their default value.
Setting Details
Adjust saturation of the screen. Select a value
between "-50" to "+50".
Set color temperature of the screen. Select from
"Warm", "Normal" and "Cool".
Adjust the relative relation between the R (red),
G (green) and B (blue) data signals of the input
image and those of the output image. Select a
value between "-3" to "+3".
Adjust the brightness of red of the screen. Select
a value between "-50" to "+50".
Adjust the contrast of red of the screen. Select a
value between "-50" to "+50".
Adjust the brightness of green of the screen.
Select a value between "-50" to "+50".
Adjust the contrast of green of the screen.
Select a value between "-50" to "+50".
Adjust the brightness of blue of the screen.
Select a value between "-50" to "+50".
Adjust the contrast of blue of the screen. Select
a value between "-50" to "+50".
Audio Selector
Make the audio input setting. The setting can be separately set to each input selector
button. Select the input selector to configure.
Setting Item Default Value
Audio Selector –
Fixed Mode Off
The setting cannot be changed when "PHONO", "TUNER", "NET" or "USB" input is selected or the
WHOLE HOUSE MODE function is on.
Advanced Settings
Setting Details
Allows you to select prior input source.
"ARC": When giving priority to input signal from
ARC compatible TV.
The setting can be selected only when
Return Channel" is set to "Auto" and also the
"TV/CD" input is selected.
"HDMI": When giving priority to input signal from
HDMI jacks
The setting can be selected only when the
input is assigned to the HDMI IN jack in the
"HDMI Input" setting.
"COAXIAL" (Coaxial input): When giving priority
to input signal from DIGITAL IN COAXIAL jacks.
The setting can be selected only when the
input is assigned to the COAXIAL jack in the
"Digital Audio Input" setting.
"OPTICAL" (Optical input): When giving priority
to input signal from DIGITAL IN OPTICAL jacks.
The setting can be selected only when the
input is assigned to the OPTICAL jack in the
"Digital Audio Input" setting.
"Analog": To always output analog audio
independently of the input signal
Specify an input signal when "HDMI", "COAXIAL
(Coaxial input)", or "OPTICAL (Optical input)" is
selected for "Audio Selector". Set this item if noise
is produced, or truncation occurs at the beginning
of a track that follows a gap when playing PCM or
DTS sources.
"Off": To play an analog signal when there is no
digital signal.
"PCM": To fix the input source to PCM (except
for Multichannel PCM).
"DTS": To fix the input source to DTS (except for
DTS-HD).
Changing "Audio Selector" changes the
setting to "Off".
35