Welcome To Follett; Before You Begin - Follett 12CI400A-LI Installation, Operation And Service Manual

Welcome to Follett

Follett equipment enjoys a well-deserved reputation for excellent performance, long-term reliability and
outstanding after-the-sale support. To ensure that this equipment delivers that same degree of service, we ask
that you take a moment to review the installation portion of this manual before beginning to install the unit.
Our installation instructions are designed to help you achieve a trouble-free installation. Should you have any
questions or require technical help at any point, please call our technical service group at (877) 612-5086 or
(610) 252-7301.
Note: To expedite assistance, all correspondence or communication MUST include the model number, serial
number and complete and detailed explanation of the problem.

Before you begin

After uncrating and removing all packing material, inspect the equipment for concealed shipping damage. If
damage is found, notify the shipper immediately and contact Follett Corporation so that we can help in the filing
of a claim, if necessary.
Check your paperwork to determine which model you have. Follett model numbers are designed to provide
information about the type and capacity of Follett ice dispensing equipment. Following is an explanation of the
different model numbers.
12CI400A-LI
§ Do not tilt any unit further than 30° off vertical during uncrating or installation.
§ Dispenser bin area contains mechanical, moving parts. Keep hands and arms clear of this area at all
times. If access to this area is required, power to unit must be disconnected first.
§ Follett recommends a Follett water filter system be installed in the ice machine inlet water line (standard
capacity #00130299, high capacity #00978957, carbonless high capacity #01050442).
§ Prior to operation clean and sanitize the dispenser in accordance with instructions found in this manual.
§ Ice is slippery. Be sure counters and floors around dispenser are clean, dry and free of ice.
§ Do not block right side air intake or top air exhaust.
12CI400A • 12HI400A
I = ice-only; no water
Dispense actuation, L = lever, S = SensorSAFE
Condenser type, A = air-cooled
Ice machine capacity in lbs per day
Ice machine location, I = integral
Dispenser configuration, C = countertop, H = wall mount
Approximate storage capacity in lbs
CAUTION!
3