Table of Contents
Advertisement
Safety information on your product
Before you begin using the product described here, it is essential to read and ad-
here to the following safety information.
Qualified personnel
Only qualified personnel may commission and operate this device. For the purpose
of the safety notes in this manual, qualified personnel are those persons who are
authorized to commission, ground and tag devices, systems and electrical circuits
according to the standards of safety technology.
Intended use of hardware products
Adhere to the following information on the intended use of hardware products.
Caution
The device may only be used for the technical applications described in the cata-
log and only with products of Siemens or recommended by Siemens or devices
and components of other manufacturers which have been approved by Siemens.
Correct, safe operation of the product depends on correct transportation, correct
storage, installation and mounting as well as careful operator control and mainte-
nance.
Before you begin using the included sample program or your own programs, make
sure that no injury or property damage to man or machine can occur on the run-
ning systems.
EG note: Commissioning is prohibited until it can be determined that the machine
in which these components is to be installed meets the specifications of guideline
89/392/EWG.
Advertisement
Table of Contents
