Fuel Tank Oil Level - Check; Engine Oil Level - Check - Mitsubishi S4S-DT Operation & Maintenance Manual

Hide thumbs Also See for S4S-DT:
Table of Contents

Advertisement

Chapter 3 OPERATION

Fuel tank oil level - Check

When working around fuel, make sure there are no open flames, heaters or other fire hazards.
Wipe off any spilled fuel completely.Spilled fuel can ignite and cause a fire.
Do not remove the strainer when filling the fuel tank.
For fuel to be used, refer to
Make sure the fuel tank is full.
If the fuel level is low, refill the tank to the "FULL" level
line.

Engine oil level - Check

For engine oil to be used, refer to
1. Pull out the oil level gauge and wipe it clean using
a waste cloth.
2. Insert the oil level gauge fully into the oil level
gauge guide, then pull out the gauge again.
3. The proper oil level is between the high and low
marks on the oil level gauge. If the oil level is low,
add engine oil of the specified type.
4. Install the oil filler cap after refilling.
5. Check the oil pan and other area for oil leakage.
3-2
"FUEL"
(4-1).
"ENGINE OIL"
(5-1).
Fig. 3-2 Fuel tank oil level - Check
Oil filler
Oil level gauge
Fig. 3-3 Oil filler and Oil level gauge
Oil level gauge
Improper
High
H
Proper
L
Low
Improper

Advertisement

Table of Contents
loading

This manual is also suitable for:

S6s-dtS4sS6s

Table of Contents