Konica Minolta bizhub C35 Reference Manual page 230

Hide thumbs Also See for bizhub C35:

Table of Contents

If you don't set the gateway, go to step 5.

Specify the gateway address for this machine.

Specify the gateway address by pressing the buttons indicated below.

[Utility Settings] – [Admin Settings] – [Ethernet] – [TCP/IP] – [Gateway]

Change the setting, and then press [OK].

After specifying administrator settings, reset the printer so that it can print.

After "Welcome!" appears in the control panel of the machine, print the

configuration page, and then check the IP address, subnet mask and

gateway address that has been specified.

Print the configuration page by pressing the buttons indicated below. [Util-

ity Settings] – [User Settings] – [Print Settings] – [Report Print] – [Config.

Install the printer driver and utilities.

Network Connection

Troubleshooting