Maintenance Procedures - HYOSUNG GT 250 R Service Manual

2-7 PERIODIC MAINTENANCE

MAINTENANCE PROCEDURES

CARBURETOR
Inspect Interval
Inspect Initial 1,000 km and Every 4,000 km.
◉ ◉ IDLE SPEED
NOTE
Make this inspection when the engine is hot.
● Connect an engine tachometer to the high tension
cord.
Start up the engine and set its speed at anywhere
1,400 and 1,500 rpm by turning throttle stop screw �.
Engine idle speed
Engine tachometer : 09900-26006
1,400�1,500 rpm
10
�