Servo; Aileron - THUNDER TIGER 4318 Christen Eagle 3D Profile EP Instruction Manual

ASSEMBLY / SERVO
15.Install wheels by threading the wheel pant retainer
in proper position.
16.Epoxy the wheel pants on the retainer. Make sure
two wheel pants are parallel.
17.Install rudder control horn, slowly inser t the
control horn to avoid any damage of surface at
the other side.
18.Press and lock the control
hor n by the backplate.
Note the orientation of the
backplate. Apply tiny of
epoxy will help secure the contorl horn in place
firmly.
Epoxy
19.Install aileron control horns.
20.Install aileron pushrods as shown.
21. For Christen Eagle owner, please install control
horn on two wings for aileron linkage.
22. Locate aileron lingage rod and thread clevises on
two ends. Snap the clevis on the lowest hole of the
control horn for best control throw.
7