Parrot CK3100 Series Installation Manual page 4

BIPPER
1
Insert the removal tools into the
slots on each side of the radio.
3
1
Unscrew screws 1 and 2 on the
sides of the drawer.
5
Remove the drawer very
carefully as it is very sharp.
This sheet is designed to help you with the installation of a Parrot product and is provided purely for information purposes. The installer is
solely responsible for any installation carried out in accordance with the instructions in this sheet and for the quality of the installation. All
rights reserved © Copyright 2011 PARROT SA, a French Société Anonyme (Public Limited Company) Registered on the Paris Trade and
Companies Register under No. 394 149 496 Reproduction not permitted without authorisation from Parrot SA. Images not contractually
Disassembly 1 / 2
2
!
207
Unclip, pull and remove the radio
taking care to unplug
the connector and the antenna.
3
Unscrew screws 3 and 4 on the
bottom of the drawer.
5
Unscrew screws 5 and 6 on the
panel underneath the steering
wheel, then unclip it.
2
4
4
6
6