Table of Contents
Advertisement
6
YES
DIGITAL IN
1
L
40
TOC
R
Lights when completed.
1
2
EDIT/NO
3
YES
Remote control
NAME
1
2
3
4
20
10
6
2
0
6
7
8
9 10
11 12 13 14 15
DISC
DIGITAL IN
1
L
40
20
10
6
2
0
R
1
DIGITAL IN
L
40
20
10
6
2
0
TOC
R
Lights when completed.
Naming a track or disc
5
15
6. Press the YES button.
Note:
While the TOC indicator is lit or flashing,
do not move or unplug the MD recorder.
Erasing the disc name and all
track names at one time
1. Press the
2. Press the EDIT/NO button to display
3. Press the YES button.
1
2
3
4
5
6
7
8
9 10
11 12 13 14 15
15
1
2
3
4
5
6
7
8
9 10
11 12 13 14 15
15
The
and
buttons on the
remote control can be used to select
characters. If this is the case, press the
ENTER button or the
button to
enter them.
To change the type of characters entered...
Go back to step 4 and change the
character input mode. Then, select and
enter characters using the AMCS knob.
To correct the character entered...
Move to the character you want to
correct using the
and
π
(the character blinks), and then reenter
the character you want.
To insert a character...
Move to the point at which you want to
insert a character using the
π
buttons (the insertion point
blinks).
Then turn the AMCS knob counter-
clockwise (
blinks) and press the
AMCS Knob (the cursor blinks).
Finally, enter the character you want.
To erase a character...
Move to the character which you want
to erase using the
and
π
(the character blinks) and then press the
EDIT/NO button or CLEAR button on
the remote controller (RC-339MD).
To make one space...
Turn AMCS knob to display (
press the knob to set.
"Complete" appears in the display.
Or, with the remote control, press the
NAME button.
ß
ß
button.
ß
ß
ß
"Name Erase?".
Press the EDIT/NO button several
times until "Name Erase?" appears in
the display.
Note:
Once the disc name and all track names
are erased, they cannot be restored.
All track names and the disc name are
erased.
buttons
and
buttons
) and
29
Hide quick links:
Advertisement
Table of Contents
