Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for N-Com BX4 PLUS
Summary of Contents for N-Com BX4 PLUS
- Page 1 USER INSTRUCTIONS AND SAFETY Firmware Version: 4.0x...
- Page 2 Firmware version, visit the website www.n-com.it REFERENCE STANDARDS The products of the N-Com line are in compliance with standards as per the table below: The Bluetooth system complies with the main safety requirements and other applicable provisions of Directive...
-
Page 3: Table Of Contents
GPS SATELLITE NAVIGATOR FUNCTIONS......19 STEREO FM RADIO ............. 20 10. BLUETOOTH A2DP MUSIC PLAYER ........20 11. AUDIO DEVICES WITH CABLE CONNECTION ....... 21 12. N-COM RIDER-PASSENGER INTERCOM MODE...... 21 12.1.Intercom affiliation ................21 12.2.Intercom function................21 13. N-COM BIKE-TO-BIKE INTERCOM ........22 13.1.Bike-to-Bike pair up ................ -
Page 4: Warnings And Safety
Read this User Manual carefully, as well as the User Manuals for other N-Com kits that you will be using with the N-Com BX4 PLUS . Read the simple rules listed below. Failure to comply with these rules may lead to dangerous situations. -
Page 5: Appropriate Use
Carry out all operations on the electronic equipment and on the N-Com system with the vehicle stopped, in compliance with Traffic Regulations. Caution: BX4 PLUS allows radio reception. Any radio licence fees are to the user’s charge. 1.5. -
Page 6: Disposal
1.7. Disposal Refer to this user manual and to manuals related to other parts of the N-Com system in order to disassemble the system from the helmet. Once the system has been disassembled, dispose of it according to the following instructions: The presence of a crossed-out wheelie bin indicates that in the European ... -
Page 7: Content Of The Packaging
BX4 PLUS 2. CONTENT OF THE PACKAGING The N-Com BX4 PLUS package contains: e-box Adesive Keyboard Multimedia Wire2 USB jack wire Battery charger Microphone Rechargeable Adhesive strips Microphone battery for cable foam Microphone Adhesive strips Screw Microphone securing stickers for loudspeakers... -
Page 8: Installation
3. INSTALLATION 3.1. Preliminary operations – Jet helmets or Flip-up helmets You can download the installation video from www.n-com.it X-Series Download section. Fig. 1 Fig. 2 Fig. 3 Open the helmet chin guard (only on Flip-up helmets). Pull out both comfort cheek pads, left and right, from the helmet. (Fig. 1) ... - Page 9 BX4 PLUS Remove both comfort cheek pads, left and right, from the helmet (see specific instructions in the helmet user manual). (Fig. 4) Open the visor. Remove the rear section of the comfort padding, pulling on the neck roll until it is ...
-
Page 10: Installing The Microphone - Jet Helmets Or Flip-Up Helmets
3.3. Installing the microphone – jet helmets or flip-up helmets Fig. 11 Fig. 12a Set up the microphone by inserting the clip that holds it in place, being careful to position it correctly. (Fig. 11) Note: The flat part of the clip has to face upward when the microphone is positioned as shown in Fig. -
Page 11: Installing The Battery And The Right-Hand Side Speaker
BX4 PLUS 3.5. Installing the battery and the right-hand side speaker Fig. 16 Fig. 17 Fig. 18 Connect the battery to the wiring system. (Fig. 16) Position the battery in the right polystyrene cheek pad housing and secure it using the ... -
Page 12: Positioning The E-Box
Only for X702 helmet Position the battery connector and wiring underneath the shell gasket (Fig. 21). Cut along the pre-cut lines of the plastic tab on the back of the comfort padding (Fig. 22). Secure the wiring underneath the plastic tab. -
Page 13: Installing The Adhesive Keyboard
N.B.: BEFORE replacing the left polystyrene cheek pad, follow the instructions provided in the following chapter. 3.7. Installing the adhesive keyboard Remove the N-Com plug from the left side of the helmet; to make this easier, it is recommended to push the plug from the inside of the helmet. (Fig. 27) ... - Page 14 Remove the protective film from the back of the adhesive keyboard using the special tab. (Fig. 32) Pass the antenna and keypad cable completely through, inside the helmet. Apply the keyboard to the shell and press Fig. 32 down on its entire surface to make sure that it sticks properly.
-
Page 15: Removing The System
Warning: Always verify the proper length of your chinstrap and adjust it if necessary, referring to the specific helmet instructions. Warning: After the BX4 PLUS is installed on the helmet, make sure the microphone is properly positioned in front of your mouth, if necessary adjusting the moveable element. -
Page 16: Basic Functions
The switch from one function to the next is confirmed by a vocal message that indicates the system status. When BX4 PLUS is turned on, the menu is always in the “BASE” mode. Depending on the menu position, you can manage the various audio devices and the available functions:... -
Page 17: N-Com Wizard
N-Com system directly from a smartphone. With the N-Com App, you can carry out most of the functions included in the N-Com Wizard program or, alternatively, it can be used as a wireless Bluetooth keypad. -
Page 18: Affiliation Reset Function
Bluetooth A2DP player has already been paired up, the pairing up DOES NOT have to be repeated as the A2DP protocol has already been stored in the BX4 PLUS . Once the Bluetooth device has been paired up, connection is automatic when the system is turned on. -
Page 19: Mobile Phone Functions
BX4 PLUS allows a conference call with Rider and Pillion Passenger. When a call comes in on a mobile phone connected via Bluetooth to BX4 PLUS , the Rider-Pillion Passenger intercom is temporarily turned off. However, if you wish to share the phone call with the other helmet, simply turn on the intercom manually during the phone call (by briefly pressing “on”). -
Page 20: Stereo Fm Radio
(among the pre-set ones) 10. BLUETOOTH A2DP MUSIC PLAYER You can listen to high quality music by connecting BX4 PLUS to a device equipped with Bluetooth A2DP (Advanced Audio Distribution Profile) protocol. The BX4 PLUS system is also equipped with Bluetooth AVRCP (Audio Video Remote Control Profile) protocol, which allows you to stop and resume music reproduction directly from the helmet (with devices equipped with AVRCP). -
Page 21: Audio Devices With Cable Connection
12. N-COM RIDER-PASSENGER INTERCOM MODE In order to use BX4 PLUS in wireless intercom mode, both helmets have to be equipped with a Bluetooth kit. In order for two BX4 PLUS to communicate with one another, they have to be paired up first. 12.1. -
Page 22: N-Com Bike-To-Bike Intercom
N.B.: The range of the communication varies depending on the N-Com systems used. The BX4 PLUS system stores up to 4 different BX4 PLUS systems, so that “calls” can be made to these devices. -
Page 23: Taking A Bike-To-Bike Call
BX4 PLUS 13.3. Taking a Bike-to-Bike call Four calling tones will sound in the helmet receiving the Bike-to-Bike call, and all open audio functions will be temporarily cut off (including the Rider – Pillion Passenger intercom, if any). The call can be answered by briefly pressing any key when you hear the ringtone signal. -
Page 24: Universal Intercom
14. “UNIVERSAL INTERCOM” The N-Com BX4 PLUS system can be connected via Bluetooth to intercom systems of other brands, thanks to the UNIVERSAL INTERCOM function. 14.1. Pairing up the UNIVERSAL INTERCOM To pair up an N-Com system and an intercom of another brand (from now on called Intercom B), the following procedure needs to be carried out: Put the N-Com system in the “Pair up Mode”... -
Page 25: Battery
15.2. Recharging the system To recharge the BX4 PLUS system, connect the USB cable to a battery charger or to a powered USB port. Charging occurs as follows: When you connect the BX4 PLUS system to the battery BX4 PLUS system charger, the blue LED begins to flash. -
Page 26: Summary Table Of Controls
Activate Conference Mode Activate audio via cable (2s) Deactivate audio via cable (2s) Disconnect A2PD device (2s) Play music (Play) (2s) Pause Function (Pause) (2s) Next track (Forward) (4s) Activate N-Com intercom or Universal Intercom Deactivate N-Com intercom or Universal Intercom... - Page 27 Bike 1 pair up (2s) Bike 2 pair up (2s) Bike 3 pair up (4s) Bike 4 pair up (4s) Bike-to-Bike menu enabling/disabling Erase pair ups** (4s) Briefly press at the same time. **With N-Com system in Pairing up Mode.
-
Page 28: Limited Warranty
Negligence and normal wear of internal and external parts. Any damage caused by an accident; Any change or modification made to the helmet or to the N-com system by the user or by third parties. Colour changes or damages caused by exposure to harmful chemical products. -
Page 29: Validity Of This Limited Warranty
Nolangroup. Tampering with the internal electronic card or with other parts of the N-Com system shall invalidate the warranty. Moreover, the defects covered by this warranty do not include all those specific and subjective situations that may come up during the active use of the helmet such as, for example, comfort problems while riding or aerodynamic noises. -
Page 30: Product Identification
Legislative Decree 2 February 2002 n. 24. 17.5. Product identification N-Com products are identified by means of a code that allows product traceability and identification. The identification code is printed on the adhesive label applied to the BX4 PLUS system. -
Page 31: Warranty Registration Form
18. WARRANTY REGISTRATION FORM BX4 PLUS Product name Identification code Buyer’s Information Name Last name Address Phone e-mail Dealer’s stamp Date of purchase... - Page 32 BX4 PLUS - 13/03/2015 10:06:00 Printed on recycled paper...