Used Ink Cartridge Removal Procedure - Oki IP-5620 Quick Reference Manual

Used ink cartridge removal procedure

1
Pull the used ink cartridge, together with the
cartridge holder, out of the printer.
2
Remove the cartridge holder cover.
While keeping the two cover securing claws open by
moving them to the outside (arrows (1) direction), pull
the cartridge holder cover toward the top (arrow (2)
direction).
Remove the cartridge holder cover in the arrow (3)
direction.
(1)
(2)
(1)
3
Remove the board from the cartridge holder
cover.
4
Remove the tail section fixing plate.
While keeping the two claws securing the plate open
by moving them to the outside, pull the tail section
fixing plate toward the top.
(1)
(3)
(1)
(2)
5
Remove the used ink cartridge tail section
from the tail section fixing plate.
6
Remove the used ink cartridge spout from
the cartridge holder.
7
Referring to the locations on the cartridge
holder shown in the figure, slide the four
protrusions of the ink cartridge lower plate
in the arrow direction, and remove the ink
cartridge from the cartridge holder.
Note
- Be careful not to take the silver plate of f the
car tridge holder when removing the used ink
cartridge.
31