U011Xx Error Code Table: G3 Reception - Kyocera ECOSYS M2030dn/PN Servlce Manual

(2-6) U011XX error code table: G3 reception

Error code
Function of the unit differs from that indicated by a DCS signal.
U01100
Function of the unit (excl. communication mode select) differs from that indicated by an
U01101
NSS signal.
A DTC (NSC) signal was received when no transmission data was in the unit.
U01102
No response after transmission of a DIS signal.
U01110
No response after transmission of a DTC (NSC) signal.
U01111
No training reception after reception of a DCS or NSS signal.
U01112
No response after transmission of an FTT signal.
U01113
No message reception after transmission of a CFR signal.
U01114
No message reception after transmission of an MCF signal.
U01115
No message reception after transmission of a PPR signal.
U01116
No message reception after transmission of a CTR signal.
U01117
No message reception after transmission of an ERR signal.
U01118
No further signals were received after reception of a message.
U01119
No response after transmission of an MCF signal.
U01120
No response after transmission of an RTP signal.
U01121
No response after transmission of an RTN signal.
U01122
No response after transmission of a PIP signal.
U01123
No response after transmission of a PIN signal.
U01124
No response after transmission of a CNS signal (between units of our make).
U01125
No response after transmission of a PPR signal (ECM).
U01126
No response after transmission of an ERR signal (ECM).
U01127
No response after transmission of an RNR signal (ECM).
U01128
No response after transmission of an SPA signal (short protocol).
U01129
A DCN signal was received after transmission of a DIS signal.
U01140
A DCN signal was received after transmission of a DTC signal.
U01141
A DCN signal was received after transmission of a DCS or NSS signal.
U01142
A DCN signal was received after transmission of an FTT signal.
U01143
A DCN signal was received after transmission of a CFR signal.
U01144
A DCN signal was received after reception of a message.
U01145
A DCN signal was received after transmission of an MCF signal (interoffice communica-
U01146
tion after reception of an MPS, EOM signal or confidential interoffice communication).
A DCN signal was received after transmission of an RTP signal.
U01147
A DCN signal was received after transmission of an RTN signal.
U01148
A DCN signal was received after transmission of a PIP signal.
U01149
A DCN signal was received after transmission of a PIN signal.
U01150
A DCN signal was received after transmission of a PPR signal (ECM).
U01151
Description
1-4-40
2PK/2PL/2PM/2PN