Table of Contents
Advertisement
PPPoE Setup
Input the user name and password that ISP (Internet service provider) provides. After saving it,
reboot your system. Then the DVR will build a network connection based on PPPoE. The IP
address will change to dynamic IP address after the above operation is well done.
Operation: The current IP address is displayed after successful dial-up. Use this IP address to
visit the DVR through user port.
NTP Setup
The NTP server must be installed in the PC.
Server IP
Port
Update Period
Picture 5.18 PPPoE Setup
Picture 5.19 NTP Setup
Input the IP address installed on NTP server.
Default: 123. You can set the port according to NTP server.
The same with the NTP server check interval. Default: 10
minutes.
47
Hybrid Digital Video Recorder
HDVR series
Advertisement
Table of Contents
