Rear Panel - Panasonic WR-DA7 User Manual

2-4 Rear Panel

Everything that goes in, out, and through the DA7 happens on the Rear
Panel, with the exception of the headphone connector. The DA7 provides
multiple ways for doing many things, so let your creativity be your guide.
The rear of the DA7 is configured in four rows. The top row contains analog
INPUTS 1-16 (inputs 1-8 are balanced XLR connectors and inputs 9-16 are
balanced TRS (tip-ring-sleeve) phone plug connectors). Row 2 contains
analog INS 1-16 (inserts) with (TRS) phone plug connectors. Row 3 contains
outputs for MASTER OUT, REC OUT analog, MONITORS A&B, and AUX
returns and sends 1 through 6. The bottom row contains the METER
BRIDGE connection, MIDI IN/OUT, SERIAL PORT (for direct connection to
a PC or a Macintosh computer), WORD CLOCK IN/OUT, DIGITAL IN/OUT,
and a REMOTE SW connector.
CONNECTION
INPUT/OUTPUT INS
NO 1:GND TIP:SEND
NO 2:HOT RING:RETURN
NO 3:COLD SLEEVE:GND
OdB is referenced to 0.775Vrms
WARNIG
- TO REDUCE THE RISK
CH17–24/SLOT 1
OF FIRE OR ELECTRIC
SHOCK. DO NOT EXPOSE
CH25–32/SLOT 2
THIS APPLIANCE TO
TANDEM/CH9-16
RAIN OR MOISTURE.
Signal Gnd
SIGNAL /BUS & AUX INSERT/SLOT3
GND
CAUTION
- TO REDUCE THE RISK OF ELECTRIC SHOCK,
DO NOT REMOVE COVER. NO USER SERVICEABLE PARTS
INSIDE. REFER SERVICING TO QUALIFIED SERVICE
PERSONNEL.
(signal ground)
POWER
AC Inlet
AC IN ON
OFF
Power switch
Power Switch
Turns the power on and off to the
AC Inlet
Plug the AC power cord here.
Signal Ground [SIGNAL GND]
Connect to a grounded source to stabilize the voltage levels of the connected
devices, and to prevent hum and buzz created by ungrounded sources.
-
2 2 5
INPUT16 INPUT15 INPUT14 INPUT13
THIS EQUIPMENT COMPLIES WITH THE REQUIREMENTS FOR
A CLASS A COMPUTING DEVICE IN FCC RULES PART 15
AUX
INS16 INS15 INS14 INS13
SUBPART J. OPERATION OF THIS DEVICE IN A RESIDENTIAL
TIP:ODD
AREA MAY CAUSE HARMFULL INTERFERENCE REQUIRING THE
RING:EVEN RING USER TO TAKE WHATEVER STEPS MAY BE NECESSARY TO
SLEEVE TIP CORRECT THE INTERFERNCE.
SLEEVE:GND
MASTER OUT
R L
REC OUT
(ANALOG)
R
+4dB 600 (BAL/UNBAL) +4dB 10k (BAL)
CAUTION - MAKE SURE THE POWER OF THE UNIT IS TURNED OFF
SMPTE & V SYNC
WHEN INSERTING OPTION CARDS INTO THE SLOTS OF THE UNIT.
OTHERWISE THE UNIT MAY BE DAMAGED.
DA7 Rear Panel
DA7.
C h a p t e r 2
INPUT12 INPUT11 INPUT10 INPUT9 INPUT8 INPUT7 INPUT6 INPUT5 INPUT4 INPUT3
–60dB to +10dB 5k (BAL/UNBAL)
+4dB 10k (UNBAL)
INS12 INS11 INS10 INS9 INS8 INS7 INS6 INS5 INS4
MONITOR B OUT MONITOR A OUT 2TR B IN (ANALOG) AUX
(STUDIO) (CR) RETURN SEND
R
L R L L R L 5/6 3/4 5/6
+4dB 600 (BAL) +4dB 600 (BAL) +4dB 10k (BAL) +4dB 10k (UNBAL)
DIGITAL IN / OUT
METER BRIDGE I/F MIDI SERIAL PORT WORD CLOCK REC OUT
TO PC
OUT
OUT IN IN
RS422 / 485
/THRU
110 75 AES/EBU
OFF ON OFF ON
D A 7 U s e r s ' G u i d e
INPUT2 INPUT1
INS3 INS2 INS1
RETURN SEND
3/4 1/2 1/2
(S/PDIF)
REMOTE SW
2TR A IN / INPUT15.16
Talk on/off
Rec on/off
S/PDIF