Assembling Your Breville Kitchen Wizz Pro - Breville BFP800 Instruction Booklet

ASSEMBLING yOUR BREvILLE KITCHEN WIZZ PRO

BEFORE FIRST USE
Before using your Breville food processor,
become familiar with all the parts. Remove
all packaging materials and promotional
labels, being careful when handling the
processing blades and discs as they are very
sharp. Wash the processing bowl, processing
lid and other attachments in warm, soapy
water. Rinse and dry thoroughly. (Refer to
cleaning, care and storage section).
1. Place the motor base on a dry, level work
surface. Place the processing bowl on to
the motor base with the handle in line
with the 'ALIGN HANDLE' graphic on
the motor base. (See Figure 1).
2. Turn the processing bowl clockwise
until the handle aligns with the 'TURN
TO LOCK' graphic. The processing
bowl should be securely locked into
position. (See Figure 2).
3. If using a disc, first assemble the disc
spindle onto the bowl drive coupling.
Orientate the disc so that the side you
wish to use is facing upwards. Hold
the disc by the centre plastic moulding
and position the central hole above
the attachment spindle. Push down
firmly until fitted correctly. (Please
note that these discs only fit the larger
processing bowl).
4. For using the processing blades,
carefully grasp either the quad blade,
dough blade or mini processing blade
using the central plastic support and
Fig. 1
position it over the bowl drive coupling
and push down until inserted correctly.
If using the mini processing blade,
ensure the mini processing bowl is
assembled into the main bowl first.
Fig. 2
Fig. 3
Fig. 4
11