Changing A Fuse - CITROËN DS 5 Handbook

Changing a fuse

Access to tooling
The fuse extraction tweezer is fitted to the back
of the dashboard fusebox cover.
For access to it:
F remove the cover completely and turn it
over,
F remove the tweezer.
changing a fuse
Before changing a fuse, it is necessary to:
F identify the cause of the failure and
correct it,
F switch off all electrical consumers,
F immobilise the vehicle and switch off the
ignition,
F identify the failed fuse using the allocation
tables and diagrams presented on the
following pages.
To remove or fit a fuse, it is essential to:
F use the special tweezer to extract the fuse
from its housing and check the condition of
its filament.
F always replace the failed fuse with a fuse
of the same rating (same colour); a fuse of
different rating could cause a fault (risk of
fire).
If the fault recurs after replacing a fuse, have
the electrical system checked by a CITROËN
dealer or a qualified workshop.
Practical information
Good Failed
Tweezer
The replacement of a fuse not
mentioned in the tables below could
cause a serious malfunction of your
vehicle. Contact a CITROËN dealer or a
qualified workshop.
219