Electric Parking Brake - CITROËN DS 5 Handbook

Electric parking brake

The electric parking brake combines
2 operating modes:
-
Automatic Application/Release
Application is automatic when the engine
stops, release is automatic on use of the
accelerator (this mode is activated by
default).
-
Manual Application/Release
Manual application of the parking brake is
done by pulling control lever A.
Manual release is by pulling then
releasing the control lever, while pressing
the brake pedal.
When the driver's door is opened, there
is an audible signal and a message is
displayed if the parking brake is not
applied.
Programming the automatic
mode
For some countries of sale, it is possible to
deactivate automatic operation.
In this case, deactivation is done via
the vehicle configuration menu.
If automatic mode is deactivated, the
parking brake must be applied and
released manually.
If this warning lamp comes on in
the instrument panel, the automatic
mode is deactivated.
Label on door panel
Never leave the vehicle without
checking that the parking brake is on.
This warning lamp comes on
fixed.
very cold conditions or
when towing
In these circumstances, it is
recommended that you do not apply the
parking brake.
For this, with the ignition on, deactivate
the automatic functions and release the
parking brake manually:
F Manual gearbox: engage first gear
or reverse.
F Automatic gearbox: select
position P.
discharged battery
In this case, the electric parking brake
no longer functions.
As a safety measure, immobilise the
vehicle following the recommendations
above or by placing a chock against one
of the wheels.
Call on a CITROËN dealer or a qualified
workshop.
103
Driving