Changing A Fuse - CITROËN C3 Handbook

Changing a fuse

Access to the tools
The extraction tweezer is fitted to the back of
the cover of the dashboard fuseboxes.
F Unclip the cover by pulling at the top left,
then right.
F Disengage the cover completely and turn it
over,
F Remove the tweezer from the back of the
cover.
Changing a fuse
Before changing a fuse:
F the cause of the failure must be identified
and rectified,
F all electrical consumers must be switched
off,
F the vehicle must be immobilised with the
ignition off,
F identify the failed fuse using the tables and
layout drawings in the following pages.
To replace a fuse, you must:
F use the special tweezer to extract the fuse
from its housing and check the condition of
its filament.
F always replace the failed fuse with a fuse
of the same rating (same colour); using a
different rating could cause faults (risk of
fire).
If the fuse fails again soon after replacement,
have the vehicle's electrical system checked by
a CITROËN dealer or a qualified workshop.
In the event of a breakdown
Good Failed
Tweezer
The replacement of a fuse not shown in
the tables below may cause a serious
malfunction of your vehicle. Contact
a CITROËN dealer or a qualified
workshop.
8
241