Changing A Fuse - CITROËN C4 Picasso Owner's Handbook Manual

Practical information

Changing a fuse

Access to the tools
The extraction tweezer is located in the
dashboard fusebox compartment.
For access to it:
unclip the cover by pulling at the top right,
then left,
disengage the cover completely, by
carefully pulling in the direction indicated
by the arrow,
remove the tweezer.
288
Changing a fuse
Before changing a fuse:
the cause of the failure must be identified
and rectified,
all electrical consumers must b switched
off,
the vehicle must be immobilised with the
ignition off,
identify the failed fuse using the tables and
layout drawings in the following pages.
To replace a fuse, you must:
use the special tweezer to extract the fuse
from its housing and check the condition of
its filament.
always replace the failed fuse with a fuse
of the same rating (same colour); using a
different rating could cause faults (risk of
fire).
If the fuse fails again soon after replacement,
have the vehicle's electrical system checked by
a CITROËN dealer or a qualified workshop.
Good Failed
Tweezer
The replacement of a fuse not shown in
the tables below may cause a serious
malfunction of your vehicle. Contact
a CITROËN dealer or a qualified
workshop.