Lorex LNR600 Series Instruction Manual page 26

8 Using the System
2. Configure the following settings as needed:
NOTE
The settings listed below are only shown if they are supported on the selected camera. Some camera
models do not support all settings.
• Mirror: Select Enable to flip the image horizontally.
• Flip: Select Flip 180° to flip the image vertically, or select No Flip for the default ori-
entation. You can also select the options, Clockwise 90° or Anticlockwise 90°.
• Corridor Mode: Not supported.
• 3D NR: Select Enable to turn on the camera's noise reduction feature. Noise reduc-
tion will ensure a cleaner image, especially at night, and may reduce the amount of
disk space required to store video.
• Backlight Mode: Select one of the following:
◦ Backlight Mode: Adjusts the lighting levels in the picture so you can see objects
in the foreground if there is a strong light source behind them.
◦ WDR: The camera compensates for changes in brightness across the image to
enhance the picture quality of both light and dark areas.
◦ HLC: The camera dims the brightest areas of the image to make them clearer.
◦ Off: Disable this function.
• Scene Mode: This mode allows you to adjust white balance levels for the camera.
Select Auto for the camera to automatically adjust the white balance. Select Sunny
or Night to use preset white balance levels. Select Customized to manually set
blue and red levels.
• Day&Night: This setting sets the camera's day/night mode. Select Color for the
camera to use color mode at all times. Select Auto for the camera to automatically
determine whether to use color or black and white mode. Select Black&White for
the camera to use black and white mode at all times.
NOTE
It is recommended to select Auto mode, as using Color mode may impact the camera's perform-
ance at night.
• Saturation: Adjust the vibrancy of colors in the image.
• Brightness: Adjust the image brightness.
• Contrast: Adjust the image contrast.
• Hue: Adjust the color hue of the image.
#LX400078; r.36882/36882; en-US
18