Dealing With Problems (Summary); Windows Setup - Panasonic CF-W2 Series XP Operating Instructions Manual

Dealing with Problems (Summary)

Windows Setup

During Windows setup, the process
does not move to the next screen
Starting Up
The power indicator or battery indi-
cator is not lit
The computer does not operate
when a USB device is connected
[Enter Password] is displayed
POST Startup Error(s) are displayed
Windows startup, or an operation is
extremely slow
The date and time are incorrect
48
If you encounter a problem, try the following methods.
Windows Setup: below
Starting up: below
Enter Password: page 49
Display: page 50
Setup Utility: page 51
Shutting Down: page 51
Standby/Hibernation Functions:
Battery Indicator: page 52
Onscreen Reference Manual:
Disk Operations: page 52
Reinstalling B's Recorder/B's CLiP:
SD Card Setup (SD Memory Card security function):
Fast User Switching Function:
Wireless LAN: page 53
Expanding Memory:
Other Problems: page 54
You can use the PC Information Viewer to check the computer's usage status. (
55)
Sometimes it takes time to move to the next screen. Also, it may take two to
three minutes while the computer moves to the next screen from the [Date
and time settings] screen, and then restarts automatically. Wait, and do not
press any keys, or touch the touch pad, etc. (
Check the cable connection for the AC adaptor.
Check to see if a fully charged battery is properly inserted
Remove the battery pack and disconnect the AC adaptor. Then reconnect
them.
The computer may not operate when certain USB devices are connected.
Disconnect the USB device, or set [Legacy USB Support] to [Disable] in
[Advanced] menu of the Setup Utility (
Enter your Supervisor Password or User Password. If you have forgotten
your password, contact your technical support office.
page 47
Press the F9 key in the Setup Utility (
Setup Utility's settings to their default values (except for the password, Sys-
tem Date and System Time). The Setup Utility must be run once again for
you to input the appropriate operating environment settings. (The process-
ing speed depends on the application software used, so this operation may
not cause the processing speed to increase.)
If operations slow down during streaming playback, try changing the num-
ber of colors of the display.
If you install resident software after purchasing this computer, disable the
resident software.
You can set the date and time using the following menu:
[start] - [Control Panel] - [Date, Time, Language, and Regional Options] -
[Date and Time]
If you continue to experience problems, the internal battery maintaining the
clock may need to be replaced. Contact your technical support office.
When the computer is connected to a LAN, confirm the date and time of the
server.
This computer will not correctly recognize the date and time starting from
the year 2100 A.D.
page 51
page 52
page 53
page 53
page 53
page 34).
page 31). This will restore the
page 53
page
page 19)