Using The Touch Pad - Panasonic CF-W2 Series XP Operating Instructions Manual

Using the Touch Pad

26
Use the touch pad to move the cursor on the screen and perform computer operations.
A. Work Surface (touch pad)
B. Left Button
C. Right Button
Function
Moving the Cursor
Tapping/Clicking
Double-Tapping/
Double-Clicking
Dragging
Vertical Scroll
Horizontal Scroll
NOTE
You can change the speed of the double-click or the operations of mouse but-
tons using [Mouse Properties] screen.
• To display [Mouse Properties]:
Click [start] - [Control Panel] - [Printers and Other Hardware] - [Mouse].
When using the touch pad, keep the following in mind.
• By design the touch pad is to be used with a finger tip only. Do not place any
object or press down forcefully with sharp-pointed objects, i.e. finger nails,
pencils, or pens on the work surface.
Operation
Move the tip of your finger lightly over
the work surface.
tapping or
A right-click: Can only be performed by clicking the
right button.
double-tapping or
Two quick taps, but on the second tap leave your finger
down (applying pressure) and move it on the work sur-
face.
or
While holding down the button, move your finger on the
work surface.
Trace a circle around the touch pad.
Trace a circle around the touch pad. (
Using the Touch Pad" in onscreen Reference Manual)
The setup is required before using this function.
( "Chapter 2: Using the Touch Pad" in onscreen Refer-
ence Manual)
clicking
double-clicking
"Chapter 2: