Xerox Phaser 6125 User Manual page 78

Item
Host Access List
Reset Defaults
System Setup
System Setup menu is used to make the printer operation settings, such as for alarm and power
saver mode.
Item
PowerSaver
Timer
Audio Tone
Time-Out
Panel Language
Downloaded From ManualsPrinter.com Manuals
Description
Specifies blocking the reception of data from certain IP addresses.
Initializes network data stored in NVM. The NVM is a nonvolatile memory that
stores the printer settings even after power off. Initializing the NVM will revert the
value for each item of the Wired Network menu to default.
Description
Specify the transitional time to Power Saver between 5 and 60 minutes in
increments of 1 minute.
5 min. to 60 min. (default: 30 min.)
■
For details, refer to Power Saver Mode
■
Specifies whether to turn on the alarm when an error occurs in the printer. You
cannot adjust the sound volume.
Control Panel (default: Off)
■
Invalid Key (default: Off)
■
Machine Ready (default: Off)
■
Job Complete (default: Off)
■
Fault Tone (default: Off)
■
Alert Tone (default: Off)
■
Out of Paper (default: Off)
■
Low Toner Alert (default: Off)
■
Base Tone (default: Off)
■
You can cancel a printing process when it goes beyond a set time period. Set the
time until the print job is canceled. When this timeout expires, the print job is
canceled.
5 sec. to 300 sec. (default: 30 sec.)
■
Specifies the amount of time in increments of 1 second the printer waits for
additional data before it cancels the job.
Off
■
Cannot cancel.
Specifies the language that is displayed on the control panel and Information
pages.
Phaser® 6125 Color Laser Printer
5-8
Description of Menu Items
on page 2-7