Panel Facilities; Top Panel - Pioneer CDJ-700S Operating Instructions Manual

PANEL FACILITIES

Top Panel

7 8
1
D
PROFESSIONAL
'
•
2
TIME AUTO
MODE CUE
TRACK SEARCH
3
IN/REALTIME CUE
4 ¢
SEARCH
OUT ADJUST
4
1 ¡
CUE
5
–
PLAY/PAUSE
REV
6
6
1 POWER switch
(Located on rear panel)
Provides electrical power to the player.
2 TIME MODE/AUTO CUE button
Two functions are available.
[Time display]
Each time this button is pressed, the time display
changes between the elapsed playback time of the
track (TIME) and the remaining playback time of the
track (REMAIN).
÷ The REMAIN display appears when power is turned
ON.
[Auto Cue function] ] P. 9
When a disc is initially loaded or when performing
track search, this function automatically stores the
cue point (the point immediately preceding actual
sound output) in memory.
÷ The Auto Cue function defaults to OFF when power
is first turned on.
3 TRACK SEARCH buttons (4, ¢) ] P. 9
4 SEARCH buttons (1, ¡) ] P. 9, P. 12
5 CUE button/indicator
Three functions are available.
[Cue Point Memory] ] P. 10, P. 11
[Back Cue] ] P. 12
[Cue Point Sampler] ] P. 12, P. 13
9 0
CDJ-700S
COMPACT DISC PLAYER
TEMPO
±10/±16
MASTER
TEMPO
OUT/EXIT RELOOP
OPEN
LOOP
+
FWD
TEMPO
Force ejection hole
In case the door cannot be opened by press-
ing the OPEN button due to a certain rea-
son, this unit is provided with a mechanism
for opening the door manually.
-
1. Unplug the power cord from the power
outlet.
2. Fabricate a key a uing a clip (or any me-
=
tallic wire with a diameter of about 1 mm
~
and length of about 50 mm).
!
@
3. Insert key a straight into hole b shown
in the illustration 1.
#
4. Turn key a to the right 2.
CAUTION:
Be sure power is turned OFF before using
forced eject. If forced eject is attempted
when power is turned ON, the disc may fly
$
out at high speed, resulting in damage.
6 PLAY/PAUSE button/indicator (6) ] P. 9
7 Display window ] P. 8
8 LOOP IN/REAL TIME CUE/OUT ADJUST
button ] P. 11, P. 13
9 LOOP OUT/EXIT button ] P. 11, P. 13
0 RELOOP button ] P. 11, P. 13
- Headphones jack, Level control
(HEADPHONE, HEADPHONE VOLUME)
Located on rear panel.
÷ The headphone jack is provided only to allow con-
firmation of the disc sound; as a result, the vol-
ume provided by the headphone output may seem
insufficient when listening within a disco or other
environment characterized by high sound volume.
= TEMPO control range button
(TEMPO ±10/±16)
Each time this button is pressed, the tempo adjust-
ment range produced by the TEMPO control slider
toggles between the two range ±10% and ±16%.
When the range is switched, the newly selected range
(10.0 or 16.0) flashes on the display for about two
seconds.
÷ The adjustment range defaults to ±10% when power
is first turned ON.
~ MASTER TEMPO button ] P. 11, P. 13
BEFORE OPERATIONS
a
1
b
2
<DRB1215>
En
7