Panel Facilities - Pioneer PD-J900M Service Manual

8. PANEL FACILITIES
PD - J900
@ PIONEER
MULTI PLAY ED PLavER eo s@0oM
@) POWER switch (@ STANDBY = ON)
Press to turn power to the unit ON and STANDBY.
(@) REPEAT button
Press this button for repeat playback. Pressing the button once,
twice or three times will change the repeat mode from single track
repeat, all tracks repeat, and repeat playback cancellation.
@) TIME button
This button selects the display mode of the indicator panel.
When the button is pressed during CD playback, the indication
changes from TIME, REM, to TOTAL in that order (For details
concerning the display contents, refer to the DISPLAY SECTION (see
page 8).
@HI-LITE SCAN (disc/track) button
DISC SCAN: Press this button during stop mode to play back a
10-second passage positioned one minute after the beginning of the
first track for each disc contained in the magazine in the order of
disc 1 through disc 6.
TRACK SCAN: Press the button during DISC SCAN to play back
a 10-second passage positioned one minute after the beginning of
each track in sequence for each disc contained in the magazine in
the order of disc 1 through disc 6.
To reset the starting time of HI-LITE SCAN, press HI-LITE SCAN
button during normal playback. This stores the elapsed play time
and plays back each of the 10-second passages beginning from the
stored time.
G) COMPU PGM button
if this button is pressed for A.S.E.S. recording and Manual/Track
SEARCH buttons are used to designate the length (in minutes) of
the recording tape, the CD player will automatically select and
program the CD tracks to be recorded. The tracks will be selected
for recording so that the empty portion remaining at the end of the
tape will be as short as possible. For details regarding this function,
consult the operating instructions for the amplifier used.
) Display
EJECT button (4)
Press to eject a magazine. When pressed, any magazine inside is
expelled forward.
Stop button (m)
Press to stop playback. When pressed, the player goes into stop
mode and al! operations stop.
When pressed during stop mode, the program stored in memory is
cleared.
(9) DISC NUMBER buttons (1—6)
Use to select disc numbers for playback or programming.
Manual/Track search buttons (|<< + <<, >> *>»{)
To perform track search in normal playback, programmed playback
or PAUSE mode.
You can advance to the next track or go back to the previous one
by using Manual/Track search buttons. The fast forwvard or fast
reverse function will be activated by holding down these buttons.
@® Play/Pause button (> /Il)
When the CD player is paused or stopped, press to rs ume play or
begin play.
If pressed during play, this temporarily interrupts pay.
@ Magazine insertion slot
@3 RANDOM button
Press to begin random playback.
PROGRAM button
Use to program a sequence of tracks
¢ Press this button after selecting a desired disc and tack with DISC
NUMBER and Track search buttons. Tracks will b: added in the
order in which they are specified.
¢ If only a DISC NUMBER button is pressed, all rascks on the
specified disc will be added to the program. The leters [AL] will
be appear on the indicator.
@) DELETE button
Pressing this button and then selecting the discs with li=sC NUMBER
buttons (1 through 6) or selecting the tracks with W anual/Track
search buttons will result in the selected discs and trick<s not being
played even when PLAY button is pressed.
65