Initial Selections; Selecting The Input Signal; Selecting The On-Screen Menu Language - Panasonic TH-37PH10UK Operating Instructions Manual

Initial selections

Selecting the input signal

Select the input signals to be connected by installing the optional Terminal Boards.
Notes:
• Selecting is also possible by pressing the INPUT button on the unit.
• Input terminal will not be selected if the terminal board is not installed into the SLOT.
• Select to match the signals from the source connected to the component/RGB input
terminals. (see page 36)
• In 2 screen display, the same input mode cannot be selected for the main picture and
sub picture.

Selecting the On-Screen Menu Language

18
Press to select the input signal to be played back from the
equipment which has been connected to the Plasma Display.
Input signals will change as follows:
• TH-37PH10UK
INPUT1A INPUT1B
SLOT1 is for dual input so that you can select INPUT1A or
INPUT1B for INPUT1.
INPUT1A : VIDEO signal terminal in SLOT1
INPUT1B : S-VIDEO signal terminal in SLOT1
• TH-42PH10UK, TH-50PH10UK, TH-58PH10UK
INPUT1 INPUT2A
SLOT2 is for dual input so that you can select INPUT2A or
INPUT2B for INPUT2.
INPUT2A : VIDEO signal terminal in SLOT2
INPUT2B : S-VIDEO signal terminal in SLOT2
Press to display the SET UP menu.
Press to select OSD LANGUAGE.
Press to select your preferred language.
Selectable languages
English(UK)
Deutsch
Français
Italiano
Español
ENGLISH(US)
INPUT2 PC
INPUT2B INPUT3
.......(Chinese)
.......(Japanese)
.......(Russian)
Русский
PC
TH-42PS9
INPUT MENU -/ VOL + / ENTER/
INPUT MENU -/ VOL
SET UP
SIGNAL
COMPONENT/RGB-IN SELECT
INPUT LABEL
POWER SAVE
STANDBY SAVE
POWER MANAGEMENT
AUTO POWER OFF
ENGLISH ( US )
OSD LANGUAGE
+
/ ENTER/
1/2
RGB
PC
OFF
OFF
OFF
OFF