Avital 2101L Installation Manual page 21

C C h h a a n n n n e e l l # # 8 8 : : If any button from a known transmitter is
programmed to Channel 8, all transmitters will be
erased from memory and the system features will revert
to the default settings. This is useful in cases where one
of the customer's transmitters is lost or stolen. This will
erase any lost or stolen transmitters from the system's
memory. It can also be used to start from scratch if the
transmitter buttons were programmed incorrectly.
Learn routine is exited when:
➤ ➤
Ignition is turned off.
➤ ➤
Valet/Program button is pressed too many times.
➤ ➤
More than 15 seconds elapse between steps.
One long horn honk (if connected) indicates that Learn
Routine has been exited.
© 2009 Directed Electronics, inc.
21