ASROCK N68-GS4 FX R2.0 User Manual page 28

Channel Interleaving
This allows you to enable Channel Memory Interleaving. The default value is
[Hash 2].
CAS Latency (CL)
Use this item to adjust the means of memory accessing. The default value is
[Auto].
TRCD
Use this to adjust TRCD values. The default value is [Auto].
TRP
Use this to adjust TRP values. The default value is [Auto].
TRAS
Use this to adjust TRAS values. The default value is [Auto].
Command Rate
Use this item to change Command Rate Auto/Manual setting. Min: 1N.
Max: 2N. The default is [Auto].
TRC
Use this to adjust TRC values. The default value is [Auto].
TRTP
Use this to adjust TRTP values. The default value is [Auto].
TWR
Use this to adjust TWR values. The default value is [Auto].
TRFC
Use this to adjust TRFC values. The default value is [Auto].
TRRD
Use this to adjust TRRD values. The default value is [Auto].
TWTR
Use this to adjust TWTR values. The default value is [Auto].
TRTP
Use this to adjust TRTP values. The default value is [Auto].
TFAW
Use this to adjust TFAW values. The default value is [Auto].
Chipset Settings
Chipset Voltage
Use this to select chipset voltage. The default value is [Auto].
Would you like to save current setting user defaults?
In this option, you are allowed to load and save three user defaults
according to your own requirements.
2 8 2 8 2 8 2 8 2 8