ASROCK N68-GS4 FX R2.0 User Manual page 26

some CPU, including quad-core CPU, can also increase L3 cache size up to
6MB, which means you can enjoy the upgrade CPU performance with a better
price. Please be noted that UCC feature is supported with AM3/AM3+ CPU
only, and in addition, not every AM3/AM3+ CPU can support this function
because some CPU's hidden core may be malfunctioned.
AMD Turbo Core Technology
This item appears only when the processor you adopt supports this feature.
Use this to select enable or disable AMD Turbo Core Technology. Confi guration
options: [Auto] and [Disabled]. The default value is [Auto].
AMD IO C-State Support
This allows you to enable or disable AMD IO C-State Support. The default
value is [Enabled].
CPU Active Core Control
This allows you to adjust CPU Active Core Control feature. The configuration
options depend on the CPU core you adopt. The default value is [Disabled].
Processor Maximum Frequency
It will display Processor Maximum Frequency for reference.
North Bridge Maximum Frequency
It will display North Bridge Maximum Frequency for reference.
Processor Maximum Voltage
It will display Processor Maximum Voltage for reference.
Multiplier/Voltage Change
This item is set to [Auto] by default. If it is set to [Manual], you may adjust the
value of Processor Frequency and Processor Voltage. However, it is
recommended to keep the default value for system stability.
BIOS SETUP UTILITY
Main OC Tweaker Advanced
CPU Configuration
Overclock Mode
CPU Frequency (MHz)
PCIE Frequency (MHz)
Boot Failure Guard
Boot Failure Guard Count
CPU/LDT Spread Spectrum
PCIE Spread Spectrum
SATA Spread Spectrum
ASRock UCC
AMD Turbo Core Technology
AMD IO C-State Support
CPU Active Core Control
Processor Maximum Frequency
North Bridge Maximum Frequency
Processor Maximum Voltage
Multiplier/Voltage Change
v02.54 (C) Copyright 1985-2005, American Megatrends, Inc.
CPU Frequency Multiplier
For safety and system stability, it is not recommended to adjust the value of
this item.
H/W Monitor Boot Security
Overclocking may cause
damage to your CPU and
[Auto]
motherboard.
[200]
It should be done at
[100]
your own risk and
[Enabled]
expense.
[3]
[Enabled]
[Enabled]
[Enabled]
[Disabled]
[Auto]
Select Screen
[Enabled]
Select Item
[Disabled]
Enter Go to Sub Screen
x16.5 3300 MHZ F1 General Help
x10.0 2000 MHZ
F9 Load Defaults
1.43750 V
F10 Save and Exit
[Manual]
ESC Exit
2 6 2 6 2 6 2 6 2 6
Exit