Oc Tweaker Screen - ASROCK N68-GS4 FX R2.0 User Manual

3 . 3 3 . 3 OC T 3 . 3 OC T OC Tweak OC T weaker Screen weak weak er Screen er Screen er Screen
3 . 3 3 . 3 OC T weak er Screen
In the OC Tweaker screen, you can set up overclocking features.
Main OC Tweaker Advanced
CPU Configuration
Overclock Mode
CPU Frequency (MHz)
PCIE Frequency (MHz)
Boot Failure Guard
Boot Failure Guard Count
CPU/LDT Spread Spectrum
PCIE Spread Spectrum
SATA Spread Spectrum
ASRock UCC
AMD Turbo Core Technology
AMD IO C-State Support
CPU Active Core Control
Processor Maximum Frequency
North Bridge Maximum Frequency
Processor Maximum Voltage
Multiplier/Voltage Change
v02.54 (C) Copyright 1985-2005, American Megatrends, Inc.
CPU Configuration
Overclock Mode
Use this to select Overclock Mode. The default value is [Auto]. Configura-
tion options: [Auto], [CPU, PCIE, Sync.], [CPU, PCIE, Async.] and [Optimized].
CPU Frequency (MHz)
Use this option to adjust CPU frequency.
PCIE Frequency (MHz)
Use this option to adjust PCIE frequency.
Boot Failure Guard
Enable or disable the feature of Boot Failure Guard.
Boot Failure Guard Count
Enable or disable the feature of Boot Failure Guard Count.
CPU/LDT Spread Spectrum
This feature will be set to [Enabled] as default. Configuration options:
[Disabled] and [Enabled].
PCIE Spread Spectrum
This feature will be set to [Enabled] as default. Configuration options:
[Disabled] and [Enabled].
SATA Spread Spectrum
This feature will be set to [Enabled] as default. Configuration options:
[Disabled] and [Enabled].
ASRock UCC
ASRock UCC (Unlock CPU Core) feature simplifies AMD CPU activation. As
long as a simple switch of the BIOS option "ASRock UCC", you can unlock the
extra CPU core to enjoy an instant performance boost. When UCC feature is
enabled, the dual-core or triple-core CPU will boost to the quad-core CPU, and
BIOS SETUP UTILITY
H/W Monitor Boot Security
Overclocking may cause
damage to your CPU and
[Auto]
motherboard.
[200]
It should be done at
[100]
your own risk and
[Enabled]
expense.
[3]
[Enabled]
[Enabled]
[Enabled]
[Disabled]
[Auto]
Select Screen
[Enabled]
Select Item
[Disabled]
Enter Go to Sub Screen
x16.5 3300 MHZ
F1 General Help
x10.0 2000 MHZ
F9 Load Defaults
1.43750 V
F10 Save and Exit
[Auto]
ESC Exit
2 5 2 5 2 5 2 5 2 5
Exit