Reviewing The Programmed Pattern Combination; Deleting A Pattern From The Programmed Combination - Janome Memory Craft 6300P Instruction Manual

Janome MC6300 Instruction Manual
www.toews.com
Blinking dot

Reviewing the Programmed Pattern Combination

Example:
To review the combination of patterns 36, 26 and 40.
Press the twin needle button and pattern number 36 will be
indicated in the LED window.
Press the twin needle button again and pattern numeber 26
will be indicated.
Press the twin needle button again and pattern numeber 40
will be indicated.
NOTES:
A blinking dot indicates that the pattern has been
programmed.
The LED window will indicates "– –" after the last pattern
number in the program.

Deleting a Pattern from the Programmed Combination

Example:
To delete pattern 26 form the combination of patterns 36, 26
and 40.
Press the twin needle button until pattern number 26 is
indicated.
Press the clear button to delete pattern 26. The LED window
will indicate the next pattern, number 40.
NOTE:
Pressing and holding the clear button will delete all the
programmed patterns in the combiantion.
57
Janome Professional Sewing Machine
MC6300 Owners Manual/ User Guide