Janome Memory Craft 6300P Instruction Manual page 67

Janome MC6300 Instruction Manual
Warning Sign
LED blinks
LED blinks
The Buzzer Sounds when:
Audible Signal
pip Normal operation
pip-pip-pip Invalid operation or malfunction
pip-pip-peep Buttonhole sewing is finished.
www.toews.com
Cause
The power is turned on with the needle in the
down position.
The power is turned on again after auto thread
cutting has been interrupted.
The presser foot is raised before auto thread
cutting is completed.
64
Janome Professional Sewing Machine
Try this
Press the up/down needle button
to raise the needle.
Press the Thread cutter button
to finish auto thread cutting.
MC6300 Owners Manual/ User Guide