Programming A Pattern Combination Pattern Combination - Janome 4300QDC Instruction Book

z
x
c
v
b
PROGRAMMING A PATTERN
COMBINATION
Pattern Combination
Example: Pattern 73 and 72 (mode 3)
NOTE:
atterns in the different mode can also be
programmed.
heck tension balance by test sewing.
Manual tension adjustment may be required when
sewing a pattern combination.
p to 50 stitch patterns combination can be
registered.
Stitch patterns selected in mode 1 (direct pattern
selection) cannot be registered (refer to page 24).
z Select pattern 73 in mode 3.
x Press the memory key.
c Select pattern 72 in mode 3.
v Press the memory key.
b Start sewing. Combination of patterns 73 and 72 will
be sewn repeatedly.
NOTE:
If you press the auto-lock button in the middle of
sewing, the machine will sew to the end of the current
q
pattern, sew locking stitches and stop automatically.
q Auto-lock button
61