Winding The Bobbin - Janome Memory Craft 6300P Instruction Manual

Janome MC6300 Instruction Manual
2
x
c
3
v
b
n
www.toews.com
1
z
4
5

Winding the bobbin

z Pass the thread through the guide on the thread
guide post from behind.
1 Thread Guide Post
x Pass the thread under the bobbin winding
tension disk.
2 Bobbin Winding Tension Disk
c Thread through the hole in the bobbin from the
inside to the outside.
Put the bobbin on the bobbin winder spindle.
3 Bobbin Winder Spindle
v Push the bobbin winder stopper to the left.
Hold the free end of the thread in your hand
and press the bobbin winding button.
Press the bobbin winding button again to stop
the bobbin when it has made several turns, and
cut the thread close to the hole in the bobbin.
4 Bobbin Winder Stopper
5 Bobbin Winding Button
b Press the bobbin winding button again. When
the bobbin is fully wound, the machine will stop
automatically.
n Return the bobbin winder stopper to its original
position, and cut the thread.
NOTE:
This machine has an exclusive motor for bobbin
winding, which allows you to wind the bobbin
while stitching.
12
Janome Professional Sewing Machine
MC6300 Owners Manual/ User Guide