Control With Viera Link; Input Signal That Can Be Displayed - Panasonic TX32LX80 Operating Instructions Manual

HDMI connections to some Panasonic equipment allow you
t o
enjoy the easy playback.
" Setup the equipment to enable this function. Read the manual of the equipment.
" Switch the TV until on again with the equipment on when connection or setup is changed.
" This function may not work normally depending on the equipment condition.
" The equipment can be operated by TVs remote control with this function on even if TV is in Standby
mode.
" Image or sound may not be available for the first few seconds when the playback starts.
" Image or sound may not be available for the first few seconds when the input mode is switched.
" Easy playback is also available by using the remote control from Amplifier or Player Theatre.
Read the manual of the equipment.
Mark: Applicable input signal for Component (Y,
PSICB, PR/CR)
and HDMI
525 (480) /601
1
15.73
1
59.94
526(480)/60p
625 (576) /501
1525 (576) / 50p
750 (720) / 60p
750 (720) 1 50p
1,125 (1,080) 1 60i
31.47
15.63
31.25
45.00
37.50
33.75
1,125 (1,080) / 501 1
28.13
P C (D-sub 15P)
59.94
50.00
50.00
60.00
50.00
1
60.00
1
50.00
640 x 480 @60 Hz
800 x 600 @100 Hz
852 x 480 @60 Hz
1,024 x 768 @60 Hz
1,366 x 768 @60 Hz
NiEl
"
Signals other than the above may not be displayed properly.
" The above signals are refbrmatted for optimal viewing on your display.
OApplicable input signal for PC is basically compatible to VESA standard timing.
0 PC signal is magnified or compressed for display, so that it may not be possible to show fine detail with
sufficient clarity.
26