Panasonic TX32LX80 Operating Instructions Manual page 15

Adjusts volume level of right and left speakers
Adjusts the volume level of the headphones
G ives a greater spatial effect by using dynamic enhancer (Off / On)
*Switching is also possible by SURROUND button on the remote
control.
C hooses according to the signal when HDMI is connected (Auto I
Digital /Analogue)
0 HDM12 terminal is for digital signal only.
P ress the OK button to reset the present Sound Menu to the default
setfings.
V IERA Link function (Off I On) (page 18)
Teletext display mode (FASTEXT I List)
Sets the time the unit automatically turns Off (Off / 15 / 30 / 45 160 1
75190) (minutes)
Child lock can be set for each channel and each AV mode
Image and sound are not available during Child lock On (Black screen
will appear)
0 Select the channel or AV mode you want to lock and set this function.
B lue back display (Off / On)
" On: Blue back display when there are no signals
" Off: Blue back display off
Reproduction of irregular signals, such as certain TV games and rental
video tapes, may be improved. (Off / On)
Edits or sets channels (page 16)
Displayed during AV mode. If a clear picture with current colours
cannot be obtained when a Broadcast or AV signal is received, this
function is used. (Auto I PAL / SECAM I NTSC 4.431 NTSC 3.58)
PAL, SECAM and NTSC 3.58 are different colour signal broadcast
transmission systems applicable to different countries. NTSC 4.43
is a trick playback mode used in special VCRs t6playback NTSC
recorded video tapes through PAL television equipment.
Displayed during AV mode. Available only with 480p or 576p input
signals in a natural colour from digital equipment connected to AV2
Component terminals.
Select SD or HD to adjust suitable colour parameters for SD (Standard
definition) or HD (High definition)
" SD: Input signal is a normal TV system.
" HD: Input signal is a High-Definition system.
set the appropriate picture mode based on viewing environment.
" Home: Picture mode is set as "Standard" (for optimal picture/power
consumption for home viewing.
" Shop: Picture mode is set as "Dynamic" (for in-store display).
Is