JUKI LZ-2290A Series Manual page 13

Max zigzag width
/ Max feed pitch
Two different part numbers are assigned to one presser foot ( ex. 22547962 and 22547970), if you place a order for 22547962 ( left number ),
factory supplies you presser foot installed with a big figure guide, 22547970 ( right number ) with small finger guide respectively.
Throat plate Feed dog
Max. feed amount: 2.5mm
Max. feed amount: 1.6mm
Max. feed amount: 1.3mm
Max. feed amount: 2.5mm
Max. feed amount: 2.5mm Max. feed amount: 5mm
Max. feed amount: 2.5mm Max. feed amount: 5mm
Max. feed amount: 2.5mm Max. feed amount: 5mm
Max. feed amount: 2.5mm
Max. feed amount: 2.5mm
Presser foot (with finger guard)
Light-in-weight type
Light-in-weight type
with the front fulcrum
Light-in-weight type
Light-in-weight type
Presser foot with a knife
Using one trimming knife.
Threed cutter knife
Light-in-weight type
Light-in-weight type
Light-in-weight type
with the front fulcrum
Light-in-weight type