Multi Pip - Panasonic TX-26LX500A Operating Instructions Manual

MULTI PIP

Press the MULTI PIP button. Whilst the on screen selector keys are displayed, use
the Red or Green buttons to move between the PIP (picture in picture) feature,
POP (picture out of picture) and PAP (picture and picture) feature.
Press the Blue button to swap the contents of the two windows.
The on screen selector keys that appear for the features clear after a few seconds.
If you want to select an operation when the keys are not shown, press the MULTI
PIP button again and the keys will reappear.
Press the MULTI PIP button (whilst the selector keys are displayed) to return to
normal viewing.
Notes:
• This TV has one tuner. When the main and sub windows are both TV mode,
these are the same TV channel.
• This operation cannot be made during PC mode, HDMI mode, Card operations
mode, progressive signal and 1080i signal input (Y, P
Changing the channels
• Main window
Press the Programme Number button on the remote control.
• Sub window
Press the MULTI PIP button. Whilst the on screen selector keys are
displayed, press the Programme Number button on the remote control.
Changing the mode
• Main window
Press the TV/AV button to switch between the TV and AV mode.
During the AV mode, press any coloured button. Whilst the on screen
selector keys are displayed, press coloured button to select the AV
source.
• Sub window
Press the MULTI PIP button. Whilst the on screen selector keys are
displayed, press the TV/AV button to switch between the TV channel
and all AV sources in turn.
, P ).
B R
MULTI PIP
TV/AV
Picture in picture mode
2
POP PAP
A
main
window
window
B
AV1
POP PAP
Press the Blue button.
The two pictures have been
swapped, the picture in the smaller
window has become the main
window picture.
Picture out of picture mode
2
PAP PIP
Picture and picture mode
2
PIP POP
OK
1 2 3
4 5 6
7 8 9
0
TV
AV1
Change
sub
2
Change
AV1
Change
AV1
Change
21