Picture Menu - Panasonic TX-26LX500A Operating Instructions Manual

Picture menu

Press the MENU button.
Move to choose Picture menu.
Access Picture menu.
Move to choose menu option.
Adjust chosen option or access chosen menu.
Press the EXIT button at any time to go back to watching TV.
Menu Menu mode will be memorized for each TV, AV1, AV2,
AV3, AV4, PC, HDMI and Card operations mode.
Dynamic / Standard / Cinema / Auto
You can change the level of each Item (Contrast,
Brightness, Colour, Sharpness, NTSC-Tint, Colour
temperature, C.Management, D.PNR, MPEG NR and 3D-
COMB) for each Menu (Dynamic, Standard, Cinema and
Auto) according to your personal preference.
Note:
C.A.T.S. (page 10) is in effect when Menu mode is set to Auto.
Contrast, Brightness, Colour, Sharpness
Increase or decrease the levels of these options according
to your personal preference.
NTSC-Tint (Tint) The picture hue can be adjusted to suit your taste.
Notes:
• When the TV is receiving NTSC signals, NTSC-Tint is
displayed and level adjustment is possible.
• When the TV is receiving YUV (60Hz) signals, Tint is
displayed and level adjustment is possible.
Colour temperature Allows you to set the overall colour tone of the picture. Choose from Cool, Standard and Warm.
Colour management Enables vivid colour adjustment automatically.
D.PNR Reduces noise in a channel with many noises.
Remains Off when receiving a strong signal.
Off:
Strong: Applies strong noise reductions regardless of input signals.
Weak:
Auto:
MPEG NR Reduces MPEG noise.
Allows you to choose from Off, Strong, Mid and Weak.
This function is effective in reducing the digital block noise when viewing DVD, VCD, SD card or
digital broadcasting.
The effect will be changed based on the scene and image.
MPEG: Compression technology of the image signal adopted by DVD, VCD, SD card or digital
broadcasting.
3D-COMB Occasionally, whilst viewing still or slow moving pictures, colour patterning may be seen. Set
3D-COMB to On to display sharper and more accurate colours.
Displayed only when receiving PAL or NTSC signals.
Not displayed during RGB Video, S Video, Component, PC, HDMI input and Card operations.
Note
By pressing the N button on the remote control while the Picture menu is displayed, the selected menu will be
changed to the Normal mode.
Normalization will not occur if the menu is not displayed when the N button is pressed.
The Normal mode is the factory preset condition. Returning to this original condition is called "Normalization".
Recommended mode when receiving a strong signal.
Applies weak noise reductions regardless of input signals.
Automatically reduces unwanted picture noise.
MENU
OK
EXIT
Main menu
Picture menu
Sound menu
Setup menu
Picture menu
Menu
Dynamic
Contrast
Brightness
Colour
Sharpness
NTSC-Tint
Colour temperature
Standard
Picture menu
On
Colour management
D. PNR Auto
MPEG NR Mid
3D-COMB On
OK
1 2 3
4 5 6
7 8 9
0
TV
17