8
www.electrolux.com
3.
CONTROL PANEL
PROGRAM SELECTOR
3.1
KNOB
Turn the Program Selector knob to
choose the wash program you
want. The table "Your Program
Guide" shown on page 12 will help
you in selecting the right program.
The Program Selector knob is not a
timer. Once you select a wash
program, the Program Selector
knob will stay at that position for
the whole wash cycle.
When you choose the Wool and
Bedding program, the Deep Rinse
option is automatically selected for
you. You will NOT be able to select
and use Eco Rinse with these two
programs.
WATER LEVEL BUTTON
3.2
Choose the water level by pressing
Water Level button. Use only the
amount of water you need for the
wash load.
3.1
NOTE:
3.5
3.7
3.2
3.3
3.4
Water
Level
The machine will
fill the Full
amount of water
for your FULL
load.
The machine will
fill the High
amount of water
for your NEARLY
FULL load.
The machine will
fill the medium
amount of water
for your HALF
load.
The machine will
fill the Low
amount of water
for your SMALL
load.
* Maximum mass of dry cloth is
8.5 kg
Flood diagnostic is explained
on page 27. You should refer
to this if you have water
pouring onto the floorThe
display will show "
you will hear rapid short
beep continuously to remind
you about this problem.
3.6
Water level
Clothes
description
Load (kg)
6 to 8.5
4 to 6
2 to 4
0 to 2
" and