Epson Stylus Photo RX585 Service Manual page 44

EPSON Stylus Photo RX585/RX595/RX610
Warning Name
Select the number of copy. Only 1 copy can be selected.
No photos could be recognized. Make sure the photos are
Photo recognize Error
positioned correctly. For details, see your manual.
Scan to memory error
No memory card or disk inserted. Save canceled.
(no card)
Scan to memory error The capacity of the memory card or disk is insufficient.
(insufficient card capacity) Operation canceled.
Scan to memory error
The memory card or disk is write-protected. Operation canceled.
(card write-protect)
Scan to memory error Cannot create a folder on the memory card or disk. Operation
(folder not created) canceled.
Scan to memory error
The memory card or disk was removed. Operation canceled.
(card removed)
Scan to memory error
An error occurred while saving. Save canceled.
(save error)
Cannot recognize the memory card or disk. Do you want to
Format check (scan)
format it?
Format Warning An error occurred during formatting. Formatting will be
(Format error) (scan) discontinued.
Format Warning
The memory card or disk is write-protected. Operation canceled. As the memory card was write-protected, formatting failed.
(card write-protect) (scan)
Format Warning
The memory card or disk was removed. Format canceled.
(card removed) (scan)
No Image File Insert a memory card that contains photos.
Head Cleaning Replace ink cartridge before cleaning print head.
Backup error External device is not connected or media is not inserted.
(no external connection) Backup canceled.
Backup error
(insufficient external media Insufficient space on the backup device. Cannot back up files.
capacity)
Backup error (no card) No memory card in slot. Backup canceled.
Troubleshooting
Table 3-2. Warning List (continued)
Displayed Message
Troubleshooting When There is Error Display
Occurrence Condition
More than one copy has been selected.
The photo could not be recognized.
Execution of scanning to a memory card function was
attempted with no memory card inserted.
The memory card capacity is insufficient.
As the memory card is write-protected, it is not possible to
save data.
A folder could not be created on the memory card.
Data saving was not executed, since the memory card had
been removed.
Data saving was not achieved for some reason.
The memory card cannot be recognized.
An error has occurred in formatting the card. Or you pulled
out the media while formatting it.
The media is removed when formatting is to be started.
No image is contained in the memory card or no memory
card has been inserted.
Head cleaning was attempted in the Ink Low state.
The external device was not connected when backup was
started.
The capacity of the media on which the backup data is to be
saved is insufficient.
No backup source exists.
Revision B
Recovery Procedure
Select only one copy.
Set the photo and try again
Insert a memory card.
Insert a memory card that has a
sufficient capacity.
Insert a memory card with Write-
Protect canceled.
Check the data on the memory card.
Insert a memory card.
Check the source data or media.
Execute or cancel formatting.
Press the OK button and check the
media.
Insert a memory card with Write-
Protect canceled and try again.
Insert media and try again.
Insert a memory card containing
image files.
Cancel the head cleaning, or replace
the ink cartridges.
Connect the external device.
Insert media that has sufficient free
space.
Insert the memory card
44