Sony CMT-CP11 Operating Instructions Manual page 17

1
Press TAPE EJECT Z and insert a
recorded tape into the cassette holder.
With the side you want to play
facing towards you
2
Press TAPE.
"TAPE" appears.
3
Press DIR MODE on the remote
repeatedly to select " " to play one
side of the tape, "
sides, or "
repeatedly.
* The tape automatically stops after playing
back five times.
4
Press TAPE nN.
The tape starts playing.
To change the playback direction, press
TAPE nN again. The reverse side will
begin playing.
To
Stop playback
Pause
Fast-forward or
rewind
Remove or replace
the tape
Adjust the volume
Downloaded From Disc-Player.com Sony Manuals
Z
bB x
m M
X z
"to play both
"* to play both sides
Do this
Press TAPE x.
Press TAPE X. Press again to
resume playback.
With the tape stopped‚ press
TAPE M or TAPE m.
Press TAPE EJECT Z.
Turn VOLUME.
Tips
• If you press TAPE nN when the power is off,
the system automatically turns on and starts playing
the tape if there is a tape in the holder (One Touch
Play).
• To switch to the tape while listening to another
source, press TAPE nN while the tape is
stopped. The tape will automatically start playing
(Automatic Source Selection).
• To play a tape recorded with the Dolby NR system,
press DOLBY NR on the remote before step 4.
";" appears.
17