HP ProLiant DL560 Quickspecs page 9

QuickSpecs
Standard Features
Required Cabling Required Cabling Required Cabling Required Cabling
OS Support OS Support OS Support OS Support
Rack Airflow Rack Airflow Rack Airflow Rack Airflow
Requirements Requirements Requirements Requirements
Rack Mounting Rack Mounting Rack Mounting Rack Mounting
Requirements Requirements Requirements Requirements
For required cabling information, refer to the HP Web site at
http://h18000.www1.hp.com/products/servers/proliantDL560/.
Microsoft Windows 2000
Windows Server 2003
Novell NetWare
LINUX (Red Hat, SuSE)
UnitedLinux
VMware Virtualization Software
NOTE: For a more complete and up-to-date listing of supported OSs and versions, please visit our OS NOTE: NOTE: NOTE:
Support Matrix at: http://www.hp.com/go/supportos
NOTE: NOTE: For an up-to-date listing of the latest drivers available for the HP ProLiant DL560, please see:
NOTE: NOTE:
http://www.HP.com/support/files/server/us/index.html.
NOTE: For a more complete and up-to-date information on Linux support, please visit HP Linux website NOTE: NOTE: NOTE:
at http://h18000.www1.hp.com/products/servers/linux/hpLinuxcert.html
NOTE: For more complete and up-to-date information on how to buy server operating systems from HP NOTE: NOTE: NOTE:
please visit the OS product site at:
NOTE: For more information on HP's Certified and Supported ProLiant Servers, please visit the VMware NOTE: NOTE: NOTE:
Server Support Matrix at:
http://h18004.www1.hp.com/products/servers/software/vmware/hpvmwarecert.html.
Rack 10000 series Cabinets The increasing power of new high-performance processor technology Rack 10000 series Cabinets Rack 10000 series Cabinets Rack 10000 series Cabinets
requires increased cooling efficiency for rack-mounted servers. The 10000 Series Racks provide
enhanced airflow for maximum cooling, allowing these racks to be fully loaded with servers using the
latest processors.
CAUTION: CAUTION: If a third-party rack is used, observe the following additional requirements to ensure CAUTION: CAUTION:
adequate airflow and to prevent damage to the equipment:
Front and rear doors: If your 42U server rack includes closing front and rear doors, you
must allow 830 square inches (5,350 sq cm) of hole evenly distributed from top to bottom
to permit adequate airflow (equivalent to the required 64 percent open area for ventilation).
Side: The clearance between the installed rack component and the side panels of the rack
must be a minimum of 2.75 inches (7 cm).
CAUTION: CAUTION: CAUTION: CAUTION: Always use blanking panels to fill all remaining empty front panel U-spaces in the rack. This
arrangement ensures proper airflow. Using a rack without blanking panels results in improper cooling
that can lead to thermal damage.
NOTE: For additional information, refer to the Setup and Installation Guide or the Documentation CD NOTE: NOTE: NOTE:
provided with the server, or to the server documentation located in the Support section at the following
URL: http://www5.HP.com/products/servers/proliantdl560/index.html.
Tool-free support for racks with square mounting holes (including Compaq/HP 7000, 9000, 10000 and
H9 series), with an adjustment range of 24"– 36".
DA - 11595 Worldwide — Version 46 — December 16, 2005
http://h18004.www1.hp.com/products/servers/software/OEM.html
HP ProLiant DL560 HP ProLiant DL560 HP ProLiant DL560 HP ProLiant DL560
Page 9